Driver Tube(s): 1 x 12AX7, 2 x 12AU7 Power Amp: Tube (6 x 6550)
RMS Power Output: 300-Watts @ 2 ohms
RMS Power Output: 300-Watts @ 4 ohms
Tone Controls: Bass, Mid, Treble
Mid Tone Control: 3-Position Rocker Switch
Ampeg SVT VR |
---|
Preamp: Tube (3 x 12AX7, 2 x 12AU7)
Driver Tube(s): 1 x 12AX7, 2 x 12AU7 Power Amp: Tube (6 x 6550) RMS Power Output: 300-Watts @ 2 ohms RMS Power Output: 300-Watts @ 4 ohms Tone Controls: Bass, Mid, Treble Mid Tone Control: 3-Position Rocker Switch |
Ampeg SVT Classic |
---|
Preamp: Tube (2 x 12AX7)
Driver Tube(s): 1 x 12AX7, 2x 12AU7 Power Amp: Tube (6 x 6550) RMS Power Output (2 Ohms): 300-Watts RMS Power Output (4 Ohms): 300-Watts Tone Controls: 3-Band Mid Tone Control: 5-Position Selector |
Ampeg 810 AV |
---|
LF Drivers: 8 x 10"
Voice Coil: 2" Magnet Weight (each): 30 oz RMS Power Handling: 2 x 400-Watts (Stereo) RMS Power Handling: 800-Watts (Mono) Frequency Response (-3dB): 58Hz-5kHz Usable Low Frequency (-10dB): 40Hz Nominal Impedance: 2 x 8-Ohms (Stereo) Nominal Impedance: 4-Ohms (Mono)
|
Ampeg 810E |
---|
Baffle basse 8 haut-parleurs 10" Ampeg Classic, Puissance: 800 Watt RMS, Impédance: 4 Ohm |
Ampeg 15E |
---|
Ampeg SVT-15E 1x15" 200-Watt Bass Cabinet |
Ampeg 410 HE |
---|
Baffle pour basse 4 HP 10” de 500Watts |
Mark Bass Little Mar |
---|
MARK BASS LITTLE MARK 800 TUBE
|
Mark Bass 104HF |
---|
|
Ashdown ABM 115 |
---|
ABM 115 Cabinet 300W 1 x 15 bass cabinet |
Ashdown ABM 140 |
---|
ABM 410H Cabinet 650W 4 x 10 + horn bass cabinet |
Ashdown JJ 500 |
---|
Ashdown JJ500 575W JJ Burnel Signature Bass Head |
GK 800RB |
---|
Gallien Krueger 800RB. Puissance RMS: 300Watts (8 Ohms) / 200Watts (4 Ohms ) |
Hartke 115 |
---|
200W 8ohm 1x15" Aluminum Cone Bass Speaker Cabinet |
Hartke 410 XL |
---|
Hartke 410XL 4x10" 400-Watt Bass Cabinet. Aluminum Speaker Cone Drivers |
Hartke HA 3500 |
---|
tête basse à preamp hybride lampe / transistors Hartke HA3500 (350 watts 4Ω ) |
Gallien Krueger MB15 |
---|
Ampli basse combo
|
Ashdown Mag Evo II |
---|
Ampli Basse combo
|
Ampeg BA 115 |
---|
Ampli Basse Combo
|
SWR Big Ben |
---|
SWR Big Ben Bass Speaker Cabinet-400 Watt RMS 1x18" subwoofer-8 ohm |
SWR 410 Goliath II |
---|
SWR GOLIATH II SPEAKER 4X10 BASS CAB 500 WATTS BASS SPEAKER SYSTEM 10’’ SPEAKERS 8 ohms + CASTERS
|
SWR SM 400S |
---|
The SM-400 underwent its first upgrade in 1993 and was renamed the SM-400S. The amplifier’s power output was increased to 500 watts (@ 4 Ohms in Bridge/Mono Mode) and some new features were added (Internal Cooling Fan) including features that were previously available only as factory modifications (XLR Pad & Ground Lift, and Transparency Control) |
Ampeg SVT 3 PRO |
---|
RMS Power Output (8 Ohms): 275-Watts
RMS Power Output (4 Ohms): 450-Watts Preamp: Tubes (3 x 12AX7) Driver Tubes: 1 x 12AX7, 1 x 12AU7 Power Amp: Solid-State Tone Controls: 3-Band Mid Tone Control: 5-Position Graphic EQ: Yes, 9-Band Ultra Low/High Boosts: Yes Balanced Line Out: Yes, Pre/Post with Ground Lift and Level Effects Loop: Yes Preamp Out/Power Amp In: Yes Dimensions (W x H x D inches): 19 x 3.5 x 15.5 Weight: 26 Pounds
|
Ampeg SVT 2 PRO |
---|
RMS Power Output (4 Ohms): 300-Watts
RMS Power Output (2 Ohms): 300-Watts Preamp: Tubes (4 x 12AX7, 1 x 12AU7) Driver Tubes: 1 x 12AX7, 2 x 12AU7 Power Amp: Tubes (6 x 6550) Tone Controls: 3-Band Mid Tone Control: 5-Position Graphic EQ: Yes, 9-Band Ultra Low/High Boosts: Yes Balanced Line Out: Yes, Pre/Post (transformer) Effects Loop: Yes Preamp Out/Power Amp In: Yes Slave Out: Yes Dimensions (W x H x D inches): 19 x 7.5 x 15.75 Weight: 70 Pounds
|